A6 Sedan V6-2.8L (AHA) (1998)
-
Hold brake pedal securely.
-
Pry retaining tabs from ball head by tapping lightly on tool (arrow -A-
-
Keep tension on tool so that retaining tabs do not reengage at ball head
-
Pull brake pedal from ball head (arrow -B-
When installing, pay particular attention to the following points
-
Brake light switch, adjusting, Refer to Lighting and Horns.
-
Vent valve for cruise control system, adjusting, Refer to Cruise Control.
Bleeding clutch hydraulics:
-
Connect US1116 but do not switch on yet.
-
Open bleeder valve on clutch slave cylinder.
-
Attach collector bottle hose.
-
Switch on bleeder unit and allow approximately 100 cc of brake fluid to flow out of clutch slave cylinder.
-
Close bleeder valve.
-
Bleeding brake system, Refer to Brake Bleeding.