A6 Sedan V6-2.8L (AHA) (1998)
Hose/Line HVAC: Service and Repair
Refrigerant Lines From Denso Compressor
Refrigerant Lines From Denso Compressor (with A/C Clutch -N25- ), Removing And Installing
-
Discharge refrigerant circuit.
-
Remove bolts -A- and -B- (tightening torque 25 Nm).
-
O-Ring-seals-C- (23.8 mm x 2.4 mm) and -D- (11.1 mm x 1.8 mm) replacing.
NOTE:
-
There may be different methods for installing the refrigerant lines to the connecting flange.
-
Do not use the O-rings from the shipping caps that are installed on the connections when installing lines.
-
Seal off all open refrigerant lines and connections on the compressor.