audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Complete Air Conditioner Unit, Removing and Installing|Page 18547 > < Refrigerant Lines From Denso Compressor|Page 18542
Page 1
background image

Housing Assembly HVAC: Service and Repair
Complete Air Conditioner Unit, Removing and Installing

Complete Air Conditioner Unit, Removing And Installing

-

Discharge refrigerant circuit.   See: Service and Repair

-

Remove dust and pollen filter and its bracket.   See: Cabin Air Filter/Service and Repair

-

Disconnect battery cables and remove battery.

Caution

On vehicles equipped with Audi Telematics by OnStar, switch-off the emergency (backup) battery for the Telematic/Telephone
Control Module prior to disconnecting the vehicle battery. Switch-on the emergency (back-up) battery after reconnecting the
vehicle battery

NOTE:

Obtain radio code before disconnecting battery.
On vehicles with power seats, move the seats back as far as possible before disconnecting the battery.

-

Release pressure in coolant system by opening cap on coolant expansion tank.

-

Clamp off and disconnect both coolant hoses leading to heater core in air conditioner unit (e.g. using VAG 3094)

NOTE:

The coolant hoses must be re-installed in the correct positions:

Coolant hose -A- supply from cylinder head.
Coolant hose -B- return to water pump.

Bleed cooling circuit   See: Engine, Cooling and Exhaust/Cooling System/Service and Repair

Complete Air Conditioner Unit, Removing and Installing|Page 18547 > < Refrigerant Lines From Denso Compressor|Page 18542