A6 Sedan V6-2.8L (AHA) (1998)
Fuel Gauge Sender: Component Locations
All Wheel Drive
Fuel Pump Module With Sender For Fuel Gauge, Component Overview - All Engines
WARNING: Fire hazard. When working on the fuel system DO NOT smoke, work near heaters or have anything in the area that can ignite the fuel or
fumes.
1
Fuel supply line
-
From distributor connector to pump in lower accumulator unit
-
Is part of accumulator
-
Not available as replacement part
-
Install at distributor connector item 3
2
Accumulator
-
Houses pump
-
Located on right side of tank
3
Distributor connector
-
Located on right side of tank
-
Secured with 3 tabs in accumulator
-
To remove, push toward left to release tabs and pry to top
-
When installing, attach fuel line to accumulator
-
Different versions
4
Wiring harness (inside fuel tank)
-
From sender for fuel gauge -G- to fuel level sensor 2
-
Secured with 2 tie-wraps (item -6-) to suction pump lines
5
Sender for fuel gauge -G-
-
Located on right side of tank
-
With tabs installed to accumulator
-
Checking resistance
6
Cable tie
-
Fuel resistant