A6 Sedan V6-2.8L (AHA) (1998)
Headlamp Alignment Sensor: Service and Repair
Left Front Level Control System Sensor -G78-, Remove/Install
Left Front Level Control System Sensor -G78-, Removing and Installing
Removing
The front level control sensor -1- is secured with a retainer -2- to the left lower track control link -3- of the front axle.
-
Disconnect electrical connector.
-
Remove level control sensor from bracket -6- by removing nut -5- and both Allen screws -4- (3 mm).
-
By slightly depressing tabs (arrow) open wire retainer -1- at left lower track control link.
-
Remove level control sensor linkage -2-.
Installing
-
Install in reverse order of removal.