A6 Sedan V6-2.8L (AHA) (1998)
/Page-2512004.png)
-
Unscrew bolt -1- for ABS wheel speed sensor.
Note:
-
Fasten brake caliper to body with tie wire.
-
Do not allow brake caliper to hang on brake hose.
-
Remove brake disc.
-
Remove nut-1- and hex bolt, and lift out both control arms -2-.
-
Slits in wheel bearing housing may not be widened with a chisel or similar tool!
-
Swing away wheel bearing housing toward side, in direction of arrow, while pulling drive axle end out of wheel hub.
-
Remove wheel bearing housing.
