A6 Sedan V6-2.8L (AHA) (1998)
Display Group 5
If displayed value is OK:
-
Press -> button.
-
Press buttons -0- and -6- to select "End Output" function 06, and press -Q- button to confirm input.
-
Switch ignition off.
Continuation
If no speed was indicated:
-
Connect VAG 1598/22 test box to ECM harness connector.Refer to "Scan Tool Testing/Scan Tool Connecting and Initial Checks/Connecting
VAG 1598/22 Test Box" See: Testing and Inspection
-
Connect VAG 1527B LED voltage tester between ECM/test box sockets 3 (B+) and 20 (signal).
-
Lift vehicle at left-front until wheel is free.
-
Switch ignition on and rotate left-front wheel by hand.