A6 Sedan V6-2.8L (AHA) (1998)
Fuel Filler Neck: Service and Repair
Seal Insert For Fuel Nozzle, Removing And Installing (AWD)
Seal Insert For Gas Station Fuel Nozzle, Removing And Installing - All Engines
Special tools and test equipment
-
3332 Pressure piece
-
3438 Hook
Removing
-
Thoroughly clean area around fuel filler neck.
-
Remove fuel cap from filler neck.
-
Insert 3438 hook into left-inner hole of seal insert.
NOTE: If 3438 hook is not available, use a locally manufactured hook.
-
Release both tabs -arrows- using thin screwdriver.
-
Pull out insert using hook.
Installing
-
Press in seal insert using 3322 mandrel until tabs engage.
Installation position: tab slots are on top and bottom.