A6 Sedan V6-2.8L (AHA) (1998)
Front Steering Knuckle: Service and Repair
Front Wheel Bearing Housing (Steel), Removing and installing
Wheel Bearing Housing (Steel), Removing and installing
Removing
-
Remove hubcap, for light-alloy wheels pull off center cap (use pulling hook in vehicle tools).
-
Unscrew hex bolt for drive axle.
-
Remove wheel.
-
Thread in all 5 wheel bolts again.
-
Pull cable of ABS wheel speed sensor out of bracket on brake caliper.
-
Secure brake caliper to body using wire.
Note: Do not allow brake caliper to hang on brake hose.
-
Remove brake disc.
-
Unscrew bolts -1- for backing plate.
-
Pull ABS wheel speed sensor out of wheel bearing housing.
-
Remove nuts-2- and -3-.