A6 Sedan V6-2.8L (AHA) (1998)
Control Arm Bushing: Service and Repair
Lower Guide Link Hydraulic Bushings
Lower Guide Link Hydraulic Bushings, Replacing
Special tools, test equipment and auxiliary items
Pulling hydraulic bushing out of link
Note: Always use protective jaw covers when clamping an aluminum link in a vise.
Hydraulic bushing installation position
The arrows on hydraulic bushing -1- and groove -2- point toward the ball joint.
The maximum permissible deviation is ± 5°.
Pulling in hydraulic bushing
-
Insert hydraulic bushing into 3347/2 special tool.
-
Tighten 3347/1 sleeve, 3346/2 spindle and nut together.
-
Pull hydraulic bushing -A- in to stop.