A6 Sedan V6-2.8L (AHA) (1998)
Fig. 5 Installed position of lower spring seat
-
Before inserting coil spring make sure the bottom spring seat is installed correctly!
-
Hole (arrow) in spring seat -1- should be off set by 90 to the axis of bolt -A- for shock absorber -2-.
-
Allowable deviation of spring seat to the axis of the shock absorber bolt: ~ 2
Fig. 6 Installing coil spring
-
Fix bottom spring washer on spring seat with a recess, and put on center cap and stop buffer.
-
Put coil spring on bottom spring washer with clamping device (VAG1752/1).
-
End of spring coil must rest against stop (arrow)