A6 Sedan V6-2.8L (AHA) (1998)
Fig. 1 Removing tire
Rolling off or pressing off tire:
When using press-off shoes, first press tire off on opposite side of valve.
Do not use press-off shoes in hatched area -a-.
^
Position mounting shoes in area of valve so that tire iron can be placed at approximately 30 degrees -b- beside the valve.
^
Then remove tire in area of valve first.
Fig. 2 Installing tire
Do not use press-off shoes in area of valve.
^
Position wheel electronics approximately 180 degrees opposite the mounting shoe.
^
Press tire into well-drop approximately 90 degrees before the mounting shoe (see arrow).
^
Install tire.