A6 Sedan V6-2.8L (AHA) (1998)
-
Remove bolts at cover for front final drive in reverse of tightening sequence shown here.
-
Place VAG1383 transmission lift with universal mount underneath.
All
CAUTION:
-
Remove cover for front final drive from transmission housing slowly and carefully. Otherwise, fee spur gears can fall out of the transmission.
-
Spur gears that have fallen to the ground must not be re-used. The transmission must be replaced in this instance.
-
Lift off cover or intermediate flange for front final drive.
Notes:
-
Do not remove spur gears for final drive. Secure spur gears against falling out.
-
If spur gears for front final drive were in fact removed, gear identification must face outward (away from transmission) when re-installing.
Installing
-
Be sure fitting sleeve -A- is seated correctly before installing.
-
Place seal on.
-
Place cover or intermediate flange for final drive on.
Vehicles with all wheel drive