A6 Sedan V6-2.8L (AHA) (1998)
Note: The sealing lips of the oil seal can be damaged if the intermediate flange is installed carelessly.
All models
Note: When tightening the bolts for the first time by hand, be sure that the housing gap between the cover and the transmission housing
diminishes uniformly all the way around.
-
Check ATF level and top off.
Vehicles with all wheel drive
-
Install transfer case.
Tightening torques
Cover for front final drive to transmission housing ..................................................................................................................................................... 23 Nm
Intermediate flange for front final drive to transmission housing ................................................................................................................................ 23 Nm
Transfer case retransmission housing ......................................................................................................................................................................... 23 Nm