A6 Sedan V6-2.8L (AHA) (1998)
/Page-5256003.png)
-
Use lever VW 681 to pull out double seal.
Note: The lever VW68 1 must be placed behind the two sealing lips of the seal. Do not position it against the outer circumference of the seal or
the contact surface in the transmission housing will be damaged. Guide the lever carefully when prying out the seal.
Installing
-
Examine seat of seal in transmission housing for signs of damage; rework, if necessary.
-
Lightly coat outer circumference and sealing lip of oil seal with ATF.
-
Install double seal onto thrust piece tool 3383 so projecting sealing lip -arrow- of seal faces toward tool.
-
Use 3383 to install double seal until tool makes contact.
