A6 Sedan V6-2.8L (AHA) (1998)
/Page-5511002.png)
Tightening sequence:
^
Stage 1: tighten bolts -1-, -2- and -3- by hand.
^
Stage 2: tighten bolts -1- to -14- to specified torques in the sequence indicated.
Note: When tightening the bolts by hand (1st stage), make sure that the gap between the cover and the transmission housing decreases uniformly
all the way around the cover.
-
Fill with ATF, check ATF level and top up after repair.
-
Install transfer gear (where applicable).
Tightening torques
