A6 Sedan V6-2.8L (ATQ) (2000)
Front Door Latch: Service and Repair
Door Lock
Door Lock, Removing And Installing
-
Remove door trim panel.
-
Run door window up to top position.
-
Disconnect harness connector for central locking at door lock.
Notes:
-
When reinstalling the door lock, disengage operating rod - 3 - at the clip of the fulcrum lever (arrow).
-
When installing a new door lock, disengage operating rod - 3 - at sliding sleeve - 5 -.
-
Disengage operating rod - 3 -.
-
Remove combination bolts - 1 - and remove door lock - 2 - in downward direction, between door component carrier and front door shell.
-
Install in reverse order of removal.