A6 Sedan V6-2.8L (ATQ) (2000)
Trunk / Liftgate Hinge: Service and Repair
Tailgate Hinge, Removing and Installing
Tailgate Hinge, Removing And Installing
-
Disassemble rear roof trim.
-
Remove screws - 1 - and remove cover - 2 - for hinge - 3 -.
Tightening torque: 3 Nm +0/-1 Nm (27 in.lb +0/-9 in.lb).
When installing, the cover must first be centered in the notches (arrow) up in the roof flange.
-
Remove nut - 4 -.
-
Remove bolts - 1 - and hinge - 2 -.
-
Replace seal - 3 -.