A6 Sedan V6-2.8L (ATQ) (2000)
-
Support engine with supporting device
-
Remove hubcap, for light-alloy wheels pull off center cap (use pulling hook in vehicle tools).
-
Remove wheels.
-
Remove sound-deadening pan.
-
Before loosening carrier, special tool 3393 must be used to check whether holes -1 and -2- line up.
-
If this is not the case, an axle alignment must be performed after the carrier is installed.
Note: In order not to damage the joints of the upper contra/ arms, it is necessary to use VAG1383A (engine and transmission filter), for example,
to brace against too strong rebound.
-
Unscrew hex nuts -3-.
-
Remove hex bolt -1- and guide link to carrier.