A6 Sedan V6-2.8L (ATQ) (2000)
-
Turn hex bolts -2- and -5- to 110 Nm + 90°
-
Tighten hex bolts -6- to 70 Nm.
-
Tighten hex bolt-1-.
-
Tighten hex nuts -3- and -4- to 40 Nm.
-
Further tighten hex bolts for guide link 80 Nm 90°.
-
Further tighten hex bolts for guide link 90 Nm 90°.
Note change in coupling and in tightening torques
-
Coupling to the stabilizer: Tighten to 100 Nm and 60 Nm, respectively always use new ribbed nuts suspension strut to track control link, 90 Nm.
-
Insert cable of ABS wheel speed sensor into bracket on brake caliper.
-
Mount wheels.