A6 Sedan V6-2.8L (ATQ) (2000)
/Page-8678005.png)
-
Remove trim - 1 - from clip - 7 - by moving back and forth lightly.
-
Unclip A-pillar trim at clips - 3 - and - 4 -.
-
Pull out A-pillar trim - 1 - upward between instrument panel and tension bracket - 5 -.
CAUTION: Always adhere to A-pillar trim installation sequence.
Installing
-
Remove clip - 7 - from A-pillar by pressing together center of clip (always replace clip).
-
Insert new clamp - 7 - in A-pillar trim - 1 - and press in retaining clamp - 8 - (check to be sure it is securely installed).
