A6 Sedan V6-2.8L (ATQ) (2000)
/Page-8823001.png)
Memory Positioning Systems: Service and Repair
Memory Switch Unit, Removing and Installing
Removing
-
Remove door trim.
-
Remove hinged pocket assembly.
-
Detach wiring harness -4- from clips -5- (2x).
-
Using screwdriver, press in retaining lugs -2- (2x) and simultaneously push out memory switch unit -1-.
-
Disconnect harness connector -7- from memory switch unit -1-.
Installing
-
When installing, ensure wiring harness -4- is located in guide -6-.
