A6 Sedan V6-2.8L (ATQ) (2000)
Seat Cover: Service and Repair
Sport Seat
1
-
Seat cover
Removing:
-
Remove seat. See: Service and Repair/Procedures
-
Remove backrest. See: Seat Back/Service and Repair
-
Remove drawer frame. See: Service and Repair/Procedures
-
Unclip harness connector -2- for heated seats from mount.
-
Pry fastening strip out of guide channel.
-
Lift seat cover -1- and cut through upholstery clips -3- (inset-A-).
-
Remove padding.
Installing:
-
Use VAG1634 stapling tool to install new upholstery clips.
-
When installing, first staple longitudinal rods, then transverse rods.
2
-
Harness connector
3
-
Upholstery clips
4
-
Padding
5
-
Seat heater element
-
Remove from sport seat.
-
Replacement seat heater element for vehicles with side air bag and seat occupied sensor mat includes seat occupied sensor mat and seat
padding
6
-
Seat pan
Removing backrest cover