A6 Sedan V6-2.8L (ATQ) (2000)
/Page-9162001.png)
Seat Cover: Service and Repair
Without Release Button
Removing
-
Remove head restraint.
-
Using screwdriver, pry fastening strip -2- from guide channel -1-.
-
Remove head restraint mount -1- from padding -2-.
-
Remove padding -2- from cover -3-.
Installing
-
Install padding -2- in cover -3- and make sure it is correctly aligned.
-
Install head restraint mount -1- into padding -2-.
-
Press fastening strips firmly into guide channel (pull to check).
