A6 Sedan V6-2.8L (ATQ) (2000)
Seat Heater: Service and Repair
Backrest Heating Element, Removing and Installing
Backrest Heating Element, Removing And Installing
1
-
Backrest with heating element, attached to cushion foam
Removing
-
Remove seat.
-
Pull cover off backrest.
-
Remove harness connector - 2 - for backrest heating element wire.
-
Release cable mounts at backrest heating element cable.
Installing
-
Cut cable from old heating element.
-
Secure new heating element onto old heating element without folding or creasing.
2
-
Harness connector for backrest heating element wire