A6 Sedan V6-2.8L (ATQ) (2000)
/Page-9410003.png)
Inner roof frame.
Running change implemented as of VIN W 006 000 for limousines and Avant.
The foam can be worked on mechanically by sawing, grinding and drilling.
The foam can be removed with a scraper if it is heated to 500 degrees C. This procedure should be repeated several times.
Wear a mask and use a fume extractor.
A = Protective cover in roof frame.
B = Protective cover in B-pillar.
C = Position of foam
Apply foam in the following sequence:
