A6 Sedan V6-2.8L (ATQ) (2000)
Parking Brake Lever: Service and Repair
Parking Brake Bracket Trim, Removing and Installing
Parking Brake Bracket Trim, Removing And Installing
-
Pull on parking brake - 4 -.
-
Remove parking brake pry trim.
-
Remove parking brake handle.
-
Pull off parking brake bracket trim - 1 - to front.
When installing, make sure retainer - 2 - engages in groove - 3 -.
Parking brake handle, removing
-
Pry off locking pin - 2 - in direction of -arrow A-.
-
Pull off parking brake handle - 1 - in direction of -arrow B-.
Rear vent and rear air-duct connecting piece, removing
-
Use a suitable tool (fabricate and create in workshop: screwdriver bent through 90 Degree, 6-10 mm) to pull rear vent - 1 - out of rear section of
center console.
-
Disconnect connectors for cigarette lighter, vent light and rear heated seat.
-
Pull rear air-duct connecting piece - 2 - off air duct - 3 -.
Vent outlet trim, removing
-
Remove vent outlet.