A6 Sedan V6-2.8L (ATQ) (2000)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Virbration damper, removing and installing
-
Ribbed belt removed.
-
Lock carrier must be in service position.
Note: To remove the vibration dampener it is not necessary to remove the center bolt.
-
Remove vibration dampener.
-
When installing, make sure notches (arrows) in vibration dampener are aligned with locating lugs on toothed belt sprocket.
Tightening torque: 20 Nm (15 ft. lbs.).