A6 Sedan V6-2.8L (ATQ) (2000)
Malfunction Indicator Lamp: Description and Operation
EPC Warning Lamp -K132- In Instrument Cluster, Significance
Electronic Power Control (EPC) Warning Lamp -K132- In Instrument Cluster, Significance
"EPC" is an abbreviation and stands for Electronic Power Control (E-gas).
Installation location of EPC warning lamp
Engine Control Module (ECM) checks all components that are important for function of the E-Gas system after ignition is switched on.
The Engine Control Module (ECM) switches on the EPC warning lamp after ignition is switched on. Shortly after engine is started, the EPC warning
lamp will go out. This requires, first of all, that the Engine Control Module (ECM) does not detect a malfunction in the E-gas system and, secondly, that
activation of the lamp by the Engine Control Module (ECM) is OK.
If malfunctions are recognized in the E-Gas system during operation of the engine, the ECM switches on the EPC warning lamp in instrument cluster.
(These malfunctions are listed in the DTC table). An entry is made in DTC memory at the same time.