A6 Sedan V6-2.8L (ATQ) (2000)
When indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read Measuring Value Block" and press -Q- button to confirm input.
When indicated on display:
Read Measuring Value Block
Q
Input display group number XXX
-
Press buttons -0-1-6- and -6- to select "display group number 066" and press -Q- button to confirm input.
Indicated on display:
Read Measuring Value Block 66
->
1
2
3
4
-
Check Clutch Pedal Position (CPP) switch in display field 2.
If indications do not resemble description:
Check switch
-
Remove driver-side storage compartment.
-
Disconnect harness connector at Clutch Pedal Position (CPP) switch.
NOTE: Connector sockets are marked on the back side of the connector.
-
Connect multimeter between terminal 1 and 2 for resistance measurement.
-
Specification: approx. Infinity Ohms
-
Depress clutch pedal.
-
Specification: Infinity Ohms (no continuity)
If specified value is not obtained:
-
Check adjustment of switch or
-
Replace Clutch Pedal Position (CPP) switch.
If specified value is obtained:
Checking voltage supply