A6 Sedan V6-2.8L (ATQ) (2000)
4.
Restart the reflash using the Repeat button (arrow). Do not use the Cancel button.
Tip: Do not exchange the Update - CD when the Update - Programming procedure fails after it has started.
5.
Once Update - Programming (flashing) is complete, the control module must be re-initialized.
6.
The tester requests you to switch the ignition off. Switch ignition off.
7.
Disconnect VAS 5051 or VAS 5052.
8.
Connect all electrical connectors to multi-pin connections.
Reinstall the radio.
Connect VAS 6017A or B adapter to the VAS 5051 or VAS 5052.