A6 Sedan V6-2.8L (ATQ) (2000)
Evaporative Emission Control Canister: Service and Repair
EVAP Canister/Tank Leak Diagnostic System, Servicing
EVAP Canister/tank Leak Diagnostic System, Servicing - FWD & AWD
WARNING: Fire hazard. DO NOT smoke or work near heaters of have anything in the area that can ignite fuel.
1
Nut - 10 Nm (7 ft lb)
2
Cover
-
For EVAP canister
3
Stud bolt - 15 Nm (11 ft lb)
4
Sealing part
5
Vent line
-
To Evaporative Emission EVAP Canister Purge Regulator Valve -N80-
6
Vent line
-
From Gravity valve at fuel tank
7
Vacuum line
-
To diagnostic Leak Detection Pump (LDP) -V144-
8
Cable tie
-
To fasten vacuum line at bracket of LDP pump
9
Leak Detection Pump (LDP) -V144-
-
Installation position: In left rear wheelhousing below wheelhousing liner
10
3-pin electrical harness connector
-
Black
11
Connecting hose
-
Diagnostic pump/EVAP canister
-
Pressure side
-
Press release button on diagnostic pump to disconnect
12
10 Nm (7 ft lb)
13
Air filter
-
For Leak Detection Pump (LDP) -V144-