Audi Workshop Service and Repair Manuals

-

Turn accelerator pedal cable attachment approx. 1/4 -turn (90 degrees) counter clockwise -arrow- -1- and pull from bulkhead -arrow- -2-.

-

Remove accelerator pedal cable.

Installing

-

Observe notes and CAUTIONS.

Vehicles with manual transmission

-

Push accelerator pedal cable together with support -3- and accelerator pedal cable attachment -1- from engine compartment through both
bulkheads in direction of arrow.

-

Secure accelerator pedal cable support with clamp -2- from behind bulkhead in plenum chamber.

Vehicles with automatic transmission

-

Push accelerator pedal cable together with support -3- and attachment -1- from plenum chamber to outside through bulkhead and to rear through
bulkhead toward interior of car.
-Arrow- shows direction of installation.