A6 Sedan V6-2.8L (ATQ) (2000)
Air Bag Harness: Technical Service Bulletins
Airbag - Wiring Harness Repair
Group: 97
Number: 00-01
Date: Dec. 4, 2000
Subject:
Airbag Wiring Harness Repairs Using Repair Kit VAS 1978 and VAS 1978/AR
Model(s):
All
2000
Service
This bulletin contains repair procedures applicable to airbags. Certain wiring harness terminals and connectors may now be repaired using VAS 1978
Wire Harness Repair kit and VAS 1978/AR supplemental kit.
The following contain important information to keep in mind while using the VAS 1978 kit and VAS 1978/AR supplemental kit to perform harness
repairs. For more detailed questions about special cases, or the latest information about critical repairs involving safety Systems, contact the Audi
Technician Helpline at 1-800-388-2384.
WARNING!
When working on ANY airbag system, ALWAYS read and follow the Repair Manual CAUTIONS & WARNINGS.
WARNING!
DO NOT repair wiring and connectors that are hard wired to any airbag system component. Only the wiring and connectors that are a part at the main
vehicle harness may be repaired. Shielded wiring for components, such as speed sensors or knock sensors, may not be repaired, but must ALWAYS
be replaced.
DO NOT use solder when repairing a wiring harness.
Only use approved methods and materials it wiring harness repairs are required.
For additional information, refer to:
^
Self Study Program, "Wiring Harness Inspection and Repair", Course Number 971003
^
Instruction Manual, Wiring Harness Repair kit VAS 1978
^
Service Circular, Tools & Equipment, No: ATE-00-03, dated Apr. 3, 2000
For airbag repairs or component replacement, see Repair Manual, Body Interior, Repair Group 69.
Note:
If a quality repair cannot be achieved due to severe harness damage, replace the harness. Severe harness damage includes the following conditions:
^
Stretched harness with damage to wire insulation
^
Chafing in multiple locations
^
Wiring that reveals corrosion
EVERY repair adds some resistance. When carrying out repairs, make as few repairs as possible, using only the proper tools and components.
The VAS 1978 and VAS 1978/AH kits meet the requirements for the latest Audi wiring diagram repair procedures. Replacement tools, terminals and
other harness repair components are available separately.