A6 Sedan V6-2.8L (ATQ) (2000)
Seat Belt: Service and Repair
Floor Panel, Center Attachment Points
Floor Panel, Center Attachment Points
-
Remove rear seat bench.
-
Remove bolt - 4 - (1x).
-
Seal - 5 - must always be replaced.
-
When installing, make sure buckle and/or lap belt engage(s) in anti-twist projections.
-
Narrow side of buckle and/or lap belt must face in direction of travel.
1
-
Buckle
2
-
Lap belt
3
-
Lap belt with retractor
4
-
Bolt
-
Tightening torque: 55 Nm (41 ft lb)
-
Only use genuine bolts
5
-
Seal
-
Always replace.