A6 Sedan V6-2.8L (ATQ) (2000)
-
Tighten bolts securing valve body hand-tight (arrows).
Note: The bolt identified by arrow -A- is shorter than the other bolts.
-
Tighten bolts to specified torque, working from inside outward.
-
Press on securing clip (arrow) for wiring harness connector until holding tab engages.
-
Lubricate seal on intake neck of ATF filter with ATF.
-
Install ATF filter (arrows).
-
Install oil pan together with new gasket.
-
Tighten oil pan bolts in several stages and in diagonal sequence.
-
Fill with ATF; check ATF level and top up.
Tightening torques