A6 Sedan V6-2.8L (ATQ) (2000)
5
-
Spacers
-
Glue on (qty: 5) at equal distances on windshield surround - 6 -
-
Dimension-d-= 3 mm (0.118 in.)
-
Dimension -e- = 3 mm +3/-0 mm (0.118 in. +0.118/-0in.)
6
-
Windshield surround
-
Supplied with replacement windshield
-
To perform repairs, pull off windshield surround and remove adhesive - 3 - using glass scraper.
-
Prime adhesive surface with DH 009 200 02.
-
Press new windshield surround onto edge of windshield in center and secure again with adhesive DH 009 100 03 (small cartridge).
7
-
Plenum chamber cover
-
Allow window adhesive to cure before pressing into retaining strip.