A6 Sedan V6-3.2L (BKH) (2007)
/Page-7174001.png)
Rear Bumper Cover / Fascia: Service and Repair
Bumper Cover
Sedan
1
Cover
‹› Removing:
‹› Remove luggage compartment side trim.
‹› Disconnect electrical harness connectors to parking aid sensors at control module (under tail light, left side).
‹› Remove special nuts -- (accessible from luggage compartment).
‹› Remove the wheel housing liners in rear area.
‹› Remove screws - 4 - at left and right on adjusting piece - 5 -
‹› Remove screws - 8 -.
‹› Unclip side-pieces on guide piece.
‹› Remove cover.
2
Grommet
‹› Grommets must be slid onto bolts before installing cover.
