Audi Workshop Service and Repair Manuals

-

On vehicles with air suspension, position vehicle on wheels. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Steering and
Suspension/Suspension/Service and Repair/Procedures/Positioning Vehicle on Hoist and Wheels.

-

Tighten wheels. Refer to => Wheel and Tire Guide 44 Specifications.

-

Adapt control position again on vehicles with air spring suspension => [ Control Position, Programming ] See: Steering and
Suspension/Suspension/Suspension Control ( Automatic - Electronic )/Testing and Inspection/Programming and Relearning/Control Position,
Programming.

-

On vehicles with automatic headlamp range control system, perform basic setting of headlamps.

-

Perform vehicle alignment. Refer to => [ Vehicle Alignment Procedure Overview ] See: Maintenance/Alignment/Service and
Repair/Procedures/Vehicle Alignment Procedure Overview.

Suspension setting at front/rear axle must be performed on a VW/Audi approved alignment rack.