A6 Sedan V6-3.2L (BKH) (2007)
Headliner: Service and Repair
Roof Reinforcement, Sedan Without Sunroof, Installing on Body
Roof Reinforcement, Sedan without Sunroof, Installing on Body
Special tools, testers and auxiliary items required
‹› 1K adhesive (D 190 MKD A3)
Removing
-
Remove headliner => [ Headliner ].
-
Carefully pull roof reinforcement - 1 - away from body roof beginning at rear.
‹› The - arrow - points to the direction of travel.
‹› If the roof reinforcement is damaged during removal, such as with tears or kinks, it must be replaced.
Installing old roof reinforcement
-
Apply new adhesive between adhesive beads - 2 -.
-
Apply new adhesive near peripheral adhesive bead - 3 -.
Installing new roof reinforcement
-
Apply new adhesive on adhesive beads - 2 -.
-
Apply new adhesive on peripheral adhesive bead - 3 -.
All:
-
Place roof reinforcement on body roof centered between sides.
-
Push roof reinforcement from inside onto body roof.
-
Install headliner => [ Headliner ].
‹› Ignore - Items 4 to 6 -.