A6 Sedan V6-3.2L (BKH) (2007)
-
Remove seal.
-
Use trim removal wedge 3409 for this.
Note:
^
When removing, make sure that surface of cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
-
Using Trim Removal Wedge 3409, insert inner seal into groove in brake caliper.
-
Press in protective cap using special tool - 1 - and - 2 -.
-
Assembly tool for protective caps T10146/1 - 1 -.
-
Piston resetting tool T10145 - 2 -
Use protective backings