A6 Sedan V6-3.2L (BKH) (2007)
-
Mark installed position and allocation to cylinder on piston head using chalk or waterproof felt pen.
‹› Do not use a center punch or scribe, since the piston head coating will be damaged.
‹› Installation position: Arrow on piston face points toward belt pulley side.
Mark connecting rod
‹› Only replace connecting rod as a set.
‹› Do not interchange connecting rod bearings.
-
Before removing, mark allocation of connecting rod and connecting rod bearing caps to each other and to cylinder with paint - arrow -.
Connecting Rod, Installed Location