A6 Sedan V6-3.2L (BKH) (2007)
Headlamp Control Module: Service and Repair
HID Headlamps or HID Headlamps with Dynamic Cornering Light, A6, Through June 2008
High-Intensity Gas Discharge Lamp Control Module
CAUTION!
Danger to life due to high voltage.
‹› Usage and safety information for gas discharge headlamps. Refer to => Electrical System General Information 94.
Removing
-
Remove headlamp, refer to => [ Headlamp ].
-
Remove the bolts - arrows -.
-
Detach control unit from headlamp housing.
-
Disconnect the adapter cable - 4 - and the electrical connector - 3 - on the HID headlamp control module.
-
Remove the HID headlamp control module.
Installing
‹› Tightening specification. Refer to => [ HID Headlamps with Dynamic Cornering Light Overview, A6, through June
2008 ] See: Service and Repair/Removal and Replacement/HID Headlamps with Dynamic Cornering Light Overview, A6, Through June 2008.
Install in reverse order of removal, observing the following:
-
Check seal - 2 - between gas discharge headlamp control module and headlamp housing for damage.
-
Install the headlamp. Refer to=> [ Headlamp ].