A6 Sedan V6-3.2L (BKH) (2007)
Drive Belt: Service and Repair
Ribbed Belt, Removing and Installing
Ribbed belt, removing and installing
Removing
-
Remove front engine cover - arrows -.
Note:
^
Before removing ribbed belt, mark the turning direction on it with chalk or a felt tip pen. A reversed turning direction can cause damage to the belt
under operating conditions.
-
Pivot tensioning device in direction of - arrow - to relieve tension on ribbed belt.
-
Remove ribbed belt and release tensioning device.
Installing
Installation is in reverse order of removal, note the following:
-
Place ribbed belt over belt pulley as shown in the illustration.
-
Generator
-
Idler roller
-
Coolant pump
-
Power-steering pump
-
Air conditioner compressor
-
Tensioning device for ribbed belt