A6 Sedan V6-3.2L (BKH) (2007)
Tire Pressure Module: Service and Repair
Directional Stabilization Assistance Control Module and Lens Screen
Directional Stabilization Assistance Control Module and Lens Screen
Removing
-
Remove cover trim - 1 - down from the bracket in the direction of the - arrow -.
-
Press the retaining clamp - 1 - forward in direction of - arrow - and remove the directional stabilization assistance control module (J759) sideways
and down from the bracket.
-
Disconnect electrical connector and remove the directional stabilization assistance control module (J759).
-
Press clamps - arrows -, pull the lens screen out of the bracket and remove it toward the rear.