A6 Sedan V6-3.2L (BKH) (2007)
-
Insert new bolt - 2 - and self-locking nut and tighten. Refer to => [ Wheel Bearing Housing and Wheel Bearing Unit Assembly Overview ] See:
Steering and Suspension/Suspension/Rear Knuckle/Service and Repair/Removal and Replacement/Front Suspension.
Tightening specifications. Refer to => [ Wheel Bearing Housing and Wheel Bearing Unit Assembly Overview ] See: Steering and
Suspension/Suspension/Rear Knuckle/Service and Repair/Removal and Replacement/Front Suspension
-
Install wheel.
-
On vehicles with air suspension, position vehicle on wheels. Refer to => [ Positioning Vehicle on Hoist and Wheels ] See: Steering and
Suspension/Suspension/Service and Repair/Procedures/Positioning Vehicle on Hoist and Wheels.
-
Tighten wheel.