A6 Sedan V6-3.2L (BKH) (2007)
Wiring Harness: All Technical Service Bulletins
Service
Installing adapter harness
1. Switch ignition off and remove ignition key.
2. Sedan: Lift luggage compartment floor mat and secure it in position.
Avant: Remove luggage compartment floor covering (Figure 1,1) and spare wheel well cover plate (Figure 2, 2).
3. Release battery retaining strap (if installed).
Tip: If the battery retaining strap is not installed with a quick-release fastener, unscrew securing bolt on battery retaining strap.