audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

All Technical Service Bulletins for Engine Control Module:|241052|Page 7419 > < All Technical Service Bulletins for Engine Control Module:|241052|Page 7417
Page 1
background image

Engine Control Module: All Technical Service Bulletins
Campaign 24K8 - ECM Update For EVAP Monitors

RVU 24K8 - Engine Control Module Update 3.2L (CK)

24 10 44

2017503/4 

July 29, 2010. Supersedes Technical Service Bulletin Group 24 number 10-43 dated July 15, 2010 for reasons listed below.

Vehicle Information

Condition

This RVU has been released to prevent the following conditions from occurring in the vehicle:

^

Low running frequency of EVAP monitor.

^

Incorrect denominator for EVAP monitor in-use rate.

These conditions do not generate any customer complaint.

This RVU only applies to vehicles registered in the states of California, Maine, Massachusetts, New York and Vermont.

This Required Vehicle Update (RVU) is in effect until January 26, 2012. After that date, this RVU will expire and no longer be in effect.

Vehicle must meet all of the following criteria:

^

Procedure is valid only for vehicles that show the CK / 24K8 code in the ElsaWeb Campaign/Action Information screen on the day of repair.

^

Vehicle must be within the Limited New Vehicle Warranty.

^

Procedure must be performed within the allotted time frame stated in this Technical Service Bulletin. Procedure must be performed on applicable
vehicles in Dealer inventory prior to sale.

Technical Background

ECM software.

Production Solution

Optimized the ECM software.

1. For LEV 1 vehicles, write down the long coding.

All Technical Service Bulletins for Engine Control Module:|241052|Page 7419 > < All Technical Service Bulletins for Engine Control Module:|241052|Page 7417