A6 Sedan V6-3.2L (BKH) (2007)
/Page-2462004.png)
‹› Next, the threads of the protective housing in which the shear bolts are threaded is heated using the heat gun. This step decreases the locking effect
of the locking compound on the shear bolt thread, thus allowing the shear bolts to be removed more easily.
CAUTION!
By heating the shear bolts, parts of the protective housing will become extremely hot. Do not burn yourself on this! Ensure only the shear
bolts are heated and not any of the surrounding parts. Possibly cover these parts.
-
Perform the following steps in order one after the other for both shear bolts - 4 -.
-
Direct heat gun nozzle at protective housing shear bolts.
-
Switch heat gun on and heat bolt for approximately 20 to 25 seconds.
