A6 Sedan V6-3.2L (BKH) (2007)
/Page-614002.png)
Installing
Installation is in reverse order of removal. Observe the following when doing so:
‹› The camera visual area on the inside of the window must not be covered with condensation or dirty. If it is, clean the visual window by hand using
a cleaning solution (D 009 401 04).
‹› If the directional stabilization assistance control module (J759) is replaced, the camera and the control module must be recalibrated. Refer to => [
Calibration Procedure ] See: Maintenance/Alignment/Testing and Inspection/Component Tests and General Diagnostics/Calibration Procedure.
